HAGUE MULTI-MOUNT SYSTEM 3 KIT
THE FOLLOWING ITEMS ARE INCLUDED IN THE HAGUE MULTI-MOUNT SYSTEM KIT 3
1 X RC - ROD CLAMP
1 X R1000 - 1000mm CONNECTING RODS
2 X R500 - 500mm CONNECTING RODS
2 X R250 - 250mm CONNECTING RODS
1 X R125 - 125mm CONNECTING RODS
1 X CC - CONNECTING COLLAR
3 X SCS - CONNECTING STUD
1 X HM38 - HEAD MOUNT
3 X SC - SUPERCLAMP
6 X AB58 - ANGLE BRACKET
The Hague Multi Mount System 3 enables a variety of interchangeable components from Hague and Manfrotto to be used in various ways to mount a camera in a variety of positions that are sometimes difficult to reach. The MMS3 system includes the Hague triangular H38 Head Mount to which a standard ball head or a video head (with a 3/8" thread) can be attached with the camera. The head mount is then held in position using a combination of the Connecting Rods, Angle Brackets, Rod Clamp, Connecting Collar & Superclamps.
The Multi Mount System 3 is easy to use in a variety of situations and all the component parts have either a 5/8" (16mm) socket or stud which allows them to be used with other items that are part of our 5/8" range. Each Multi Mount Kit has been designed to include different items so you have a choice of kit depending on your requirements and the flexibility you require from your kit. If you then decide at a later date you require extra items these can be purchased individually. This makes it easy to grow the kit by adding additional items as required. Joining items together with the connecting rods of various lengths allows you to form a ridged platform to mount the camera on.
The following items are included with the Hague Multi Mount 3 (MMS3) kit and are compatible with the other Hague Multi Mount systems as well. Please note that all of these items are also available to purchase as individual items and that the items included in each kit do vary.
THE FOLLOWING ITEMS ARE INCLUDED IN THE HAGUE MULTI-MOUNT SYSTEM KIT 3
1 x Rod Clamp (RC)
The Rod Clamp enables two connecting rods to be held together to either adjust the length of the two rods, change direction or to brace across the rods.
6 x Connecting Rods (1 x R1000, 2 x R500, 2 x R250 & 1 x R125)
The Connecting Rods are available at 4 different lengths from 125mm, 250mm, 500mm and 1000mm.
1 x Connecting Collar (CC)
The Connecting Collar enables two 5/8" / 16mm male studs to be held together, such as holding two connecting rods together.
3 x Connecting Stud (SCS)
The Connecting Stud enables the Angle Bracket to fastened to a Superclamp.
1 x Head Mount (HM38)
The Head Mount is a triangle plate with a 3/8" threaded stud which is used to attach a Ball Levelling Head*, Pan & Tilt Head* or a Quick Release Adapter* (* sold separately). At the corners of the triangle plate are 5/8" (16mm) male studs to attach the Angle Brackets.
3 x Superclamp (SC)
The Superclamp can be attached to any pole, tube, bench or table. Its jaws will attach to a pole between 12 to 55mm in width or table edge between 12 to 30mm. It can be fixed either vertically or horizontally and has a 16mm / 5/8" female socket.
6 x Angle Bracket (AB58)
The Angle Bracket has two 5/8" (16mm) female sockets with locking handle. It is used to connect the rods to the triangle mount.
Price does not include the Manfrotto Ball Head, Manfrotto Video Head or the camera.
This item is part of our 5/8” (16mm) range. All items with the 5/8” logo displayed have either a male stud or a female socket that is 5/8” (16mm) and this makes them compatible with other items within this range. Please note that male studs are only compatible with female sockets and vice versa.
